Integer overflow in the new[] operator in gcc before 4.8.0 allows attackers to have unspecified impacts. ..read more

The std::random_device class in libstdc++ in the GNU Compiler Collection (aka GCC) before 4.9.4 does not properly handle short reads from blocking sources, which makes it easier for context-dependent attackers to predict the random values via unspecified vectors. ..read more

stack_protect_prologue in cfgexpand.c and stack_protect_epilogue in function.c in GNU Compiler Collection (GCC) 4.1 through 8 (under certain circumstances) generate instruction sequences when targeting ARM targets that spill the address of the stack protector guard, which allows an attacker to bypass the protection of -fstack-protector, -fstack-protector-all, -fstack-protector-strong, and -fstack-protector-explicit against stack overflow by controlling what the stack canary is compared against. ..read more

The POWER9 backend in GNU Compiler Collection (GCC) before version 10 could optimize multiple calls of the __builtin_darn intrinsic into a single call, thus reducing the entropy of the random number generator. This occurred because a volatile operation was not specified. For example, within a single execution of a program, the output of every __builtin_darn() call may be the same. ..read more

GCC c++filt v2.26 was discovered to contain a use-after-free vulnerability via the component cplus-dem.c. ..read more

Multiple integer overflows in the NDEF record parser in hostapd before 2.5 and wpa_supplicant before 2.5 allow remote attackers to cause a denial of service (process crash or infinite loop) via a large payload length field value in an (1) WPS or (2) P2P NFC NDEF record, which triggers an out-of-bounds read. ..read more

The EAP-pwd implementation in hostapd (EAP server) before 2.8 and wpa_supplicant (EAP peer) before 2.8 does not validate fragmentation reassembly state properly for a case where an unexpected fragment could be received. This could result in process termination due to a NULL pointer dereference (denial of service). This affects eap_server/eap_server_pwd.c and eap_peer/eap_pwd.c. ..read more

hostapd before 2.10 and wpa_supplicant before 2.10 allow an incorrect indication of disconnection in certain situations because source address validation is mishandled. This is a denial of service that should have been prevented by PMF (aka management frame protection). The attacker must send a crafted 802.11 frame from a location that is within the 802.11 communications range. ..read more

The implementations of SAE in hostapd and wpa_supplicant are vulnerable to side channel attacks as a result of observable timing differences and cache access patterns. An attacker may be able to gain leaked information from a side channel attack that can be used for full password recovery. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.7 are affected. ..read more

The implementations of EAP-PWD in hostapd and wpa_supplicant are vulnerable to side-channel attacks as a result of cache access patterns. All versions of hostapd and wpa_supplicant with EAP-PWD support are vulnerable. The ability to install and execute applications is necessary for a successful attack. Memory access patterns are visible in a shared cache. Weak passwords may be cracked. Versions of hostapd/wpa_supplicant 2.7 and newer, are not vulnerable to the timing attack described in CVE-2019-9494. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected. ..read more

An invalid authentication sequence could result in the hostapd process terminating due to missing state validation steps when processing the SAE confirm message when in hostapd/AP mode. All version of hostapd with SAE support are vulnerable. An attacker may force the hostapd process to terminate, performing a denial of service attack. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.7 are affected. ..read more

The implementations of EAP-PWD in hostapd EAP Server and wpa_supplicant EAP Peer do not validate the scalar and element values in EAP-pwd-Commit. This vulnerability may allow an attacker to complete EAP-PWD authentication without knowing the password. However, unless the crypto library does not implement additional checks for the EC point, the attacker will not be able to derive the session key or complete the key exchange. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected. ..read more

The implementations of EAP-PWD in hostapd EAP Server, when built against a crypto library missing explicit validation on imported elements, do not validate the scalar and element values in EAP-pwd-Commit. An attacker may be able to use invalid scalar/element values to complete authentication, gaining session key and network access without needing or learning the password. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected. ..read more

The implementations of EAP-PWD in wpa_supplicant EAP Peer, when built against a crypto library missing explicit validation on imported elements, do not validate the scalar and element values in EAP-pwd-Commit. An attacker may complete authentication, session key and control of the data connection with a client. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected. ..read more

The implementations of SAE in hostapd before 2.10 and wpa_supplicant before 2.10 are vulnerable to side channel attacks as a result of cache access patterns. NOTE: this issue exists because of an incomplete fix for CVE-2019-9494. ..read more

The implementations of EAP-pwd in hostapd before 2.10 and wpa_supplicant before 2.10 are vulnerable to side-channel attacks as a result of cache access patterns. NOTE: this issue exists because of an incomplete fix for CVE-2019-9495. ..read more

Multiple integer overflows in the NDEF record parser in hostapd before 2.5 and wpa_supplicant before 2.5 allow remote attackers to cause a denial of service (process crash or infinite loop) via a large payload length field value in an (1) WPS or (2) P2P NFC NDEF record, which triggers an out-of-bounds read. ..read more

hostapd before 2.6 does not prevent use of the low-quality PRNG that is reached by an os_random() function call. ..read more

hostapd before 2.6, in EAP mode, makes calls to the rand() and random() standard library functions without any preceding srand() or srandom() call, which results in inappropriate use of deterministic values. This was fixed in conjunction with CVE-2016-10743. ..read more

The EAP-pwd implementation in hostapd (EAP server) before 2.8 and wpa_supplicant (EAP peer) before 2.8 does not validate fragmentation reassembly state properly for a case where an unexpected fragment could be received. This could result in process termination due to a NULL pointer dereference (denial of service). This affects eap_server/eap_server_pwd.c and eap_peer/eap_pwd.c. ..read more

hostapd before 2.10 and wpa_supplicant before 2.10 allow an incorrect indication of disconnection in certain situations because source address validation is mishandled. This is a denial of service that should have been prevented by PMF (aka management frame protection). The attacker must send a crafted 802.11 frame from a location that is within the 802.11 communications range. ..read more

The implementations of SAE in hostapd and wpa_supplicant are vulnerable to side channel attacks as a result of observable timing differences and cache access patterns. An attacker may be able to gain leaked information from a side channel attack that can be used for full password recovery. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.7 are affected. ..read more

The implementations of EAP-PWD in hostapd and wpa_supplicant are vulnerable to side-channel attacks as a result of cache access patterns. All versions of hostapd and wpa_supplicant with EAP-PWD support are vulnerable. The ability to install and execute applications is necessary for a successful attack. Memory access patterns are visible in a shared cache. Weak passwords may be cracked. Versions of hostapd/wpa_supplicant 2.7 and newer, are not vulnerable to the timing attack described in CVE-2019-9494. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected. ..read more

An invalid authentication sequence could result in the hostapd process terminating due to missing state validation steps when processing the SAE confirm message when in hostapd/AP mode. All version of hostapd with SAE support are vulnerable. An attacker may force the hostapd process to terminate, performing a denial of service attack. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.7 are affected. ..read more

The implementations of EAP-PWD in hostapd EAP Server and wpa_supplicant EAP Peer do not validate the scalar and element values in EAP-pwd-Commit. This vulnerability may allow an attacker to complete EAP-PWD authentication without knowing the password. However, unless the crypto library does not implement additional checks for the EC point, the attacker will not be able to derive the session key or complete the key exchange. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected. ..read more

The implementations of EAP-PWD in hostapd EAP Server, when built against a crypto library missing explicit validation on imported elements, do not validate the scalar and element values in EAP-pwd-Commit. An attacker may be able to use invalid scalar/element values to complete authentication, gaining session key and network access without needing or learning the password. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected. ..read more

The implementations of EAP-PWD in wpa_supplicant EAP Peer, when built against a crypto library missing explicit validation on imported elements, do not validate the scalar and element values in EAP-pwd-Commit. An attacker may complete authentication, session key and control of the data connection with a client. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected. ..read more

The implementations of SAE in hostapd before 2.10 and wpa_supplicant before 2.10 are vulnerable to side channel attacks as a result of cache access patterns. NOTE: this issue exists because of an incomplete fix for CVE-2019-9494. ..read more

The implementations of EAP-pwd in hostapd before 2.10 and wpa_supplicant before 2.10 are vulnerable to side-channel attacks as a result of cache access patterns. NOTE: this issue exists because of an incomplete fix for CVE-2019-9495. ..read more

extensions/libxt_tcp.c in iptables through 1.4.21 does not match TCP SYN+FIN packets in --syn rules, which might allow remote attackers to bypass intended firewall restrictions via crafted packets. NOTE: the CVE-2012-6638 fix makes this issue less relevant. ..read more

The winbind plugin in pppd for ppp 2.4.4 and earlier does not check the return code from the setuid function call, which might allow local users to gain privileges by causing setuid to fail, such as exceeding PAM limits for the maximum number of user processes, which prevents the winbind NTLM authentication helper from dropping privileges. ..read more

Integer overflow in the getword function in options.c in pppd in Paul's PPP Package (ppp) before 2.4.7 allows attackers to "access privileged options" via a long word in an options file, which triggers a heap-based buffer overflow that "[corrupts] security-relevant variables." ..read more

Buffer overflow in the rc_mksid function in plugins/radius/util.c in Paul's PPP Package (ppp) 2.4.6 and earlier, when the PID for pppd is greater than 65535, allows remote attackers to cause a denial of service (crash) via a start accounting message to the RADIUS server. ..read more

eap.c in pppd in ppp 2.4.2 through 2.4.8 has an rhostname buffer overflow in the eap_request and eap_response functions. ..read more

Buffer overflow in the process_ra function in the router advertisement daemon (radvd) before 1.8.2 allows remote attackers to execute arbitrary code or cause a denial of service (crash) via a negative value in a label_len value. ..read more

Directory traversal vulnerability in device-linux.c in the router advertisement daemon (radvd) before 1.8.2 allows local users to overwrite arbitrary files, and remote attackers to overwrite certain files, via a .. (dot dot) in an interface name. NOTE: this can be leveraged with a symlink to overwrite arbitrary files. ..read more

The router advertisement daemon (radvd) before 1.8.2 does not properly handle errors in the privsep_init function, which causes the radvd daemon to run as root and has an unspecified impact. ..read more

The process_ra function in the router advertisement daemon (radvd) before 1.8.2 allows remote attackers to cause a denial of service (stack-based buffer over-read and crash) via unspecified vectors. ..read more

The process_rs function in the router advertisement daemon (radvd) before 1.8.2, when UnicastOnly is enabled, allows remote attackers to cause a denial of service (temporary service hang) via a large number of ND_ROUTER_SOLICIT requests. ..read more

Buffer overflow in the gzprintf function in zlib 1.1.4, when zlib is compiled without vsnprintf or when long inputs are truncated using vsnprintf, allows attackers to cause a denial of service or possibly execute arbitrary code. ..read more

zlib through 1.2.12 has a heap-based buffer over-read or buffer overflow in inflate in inflate.c via a large gzip header extra field. NOTE: only applications that call inflateGetHeader are affected. Some common applications bundle the affected zlib source code but may be unable to call inflateGetHeader (e.g., see the nodejs/node reference). ..read more